This system is the high-quality alternative to heavy-duty forklifts from 100,000 kg capacity. The weighing method with the high-quality BMD (Balanced Weight Determination) software on the TC indicator offers the best accuracy and is also classified as calibration according to SOLAS. Suitable for all reachstackers.
This system has no influence on the capacity of the truck and is independent of the load center point and can be used in combination with attachments. The weighing components are mounted and protected on the forklift truck and are insensitive to overloads and impact forces. The tilt sensor would be mounted on the mast ensures a tilt compensation of the weighing.
A: weighing procedure with high accuracy (execution in rest position – movement in two directions):
Weight with boom in retracted position and an angle between 10 ° and 30 °. The weighing procedure is activated via the indicator. Container approx. 3 sec. move up and move down again after the beep until the beep indicates that the weighing is complete.
B: fast weighing procedure (automatic weighing by means of a single falling movement):
The container is moved with a reachstacker. When moving down, the boom moves along a certain angle and a sensor starts the weighing.
|Weighing capacity||99,999 kg|
|Weighing tolerance||± 0.2 %|
|Nominal supply voltage||12 – 80|
|Power consumption||< 5 W|
|Temperature range||0 – 50 °C|
|Protection class, display||IP 50|
|Protection class, sensors||IP 65|
|Display||Graphical high contrast|
- Indicator TC
- High weighing accuracy ± 0.2%
- For all types of reachstacker -SOLAS compliant
- Components insensitive to impact forces and vibrations
- Integrated Converter for supply voltage 12-80 volts
- Protected against peak voltages
- Options such as printer and data transmission
BALANCED MASS DETERMINATION
BMD is a patented and accurate hydraulic based weighing technology which is utilized in the TC3000-RS solution. In addition to the advantages mentioned for DMD, hydraulic pressure, height, velocity and acceleration of the forks are recorded during upwards and downwards manoeuvring, which significantly improves the weighing accuracy and long term stability of the solution.
The TC3000-RS is based on the patented hydraulic weighing principle (BMD), which practically eliminates the influence of mechanical friction, non-linearity and weighing tolerances caused by loads positioned on the fork tips. This system represents the world’s most accurate hydraulic weighing system for forklift trucks, it is also highly robust. The dual tilt compensation technology ensures an exact weighing result regardless of the inclination of the forklift mast and the floor. The power supply and transient protection circuit enablesthe TC3000-RS to fit almost any forklift truck without having to pay special attention to supply voltages and electrical noise.