Menu
bg en ro

Griptech TC3000-RS

Oil pressure weighing kit

OPTIMIZED MATERIAL HANDLING

For the loading of sea containers on ships, the SOLAS directive requires the container to be weighed in advance. The accurate TC3000-RS system weighs a full container according to method 1 with a deviation of approx. 500 kg. The pressure sensor is mounted on the lifting cylinder and the angle and speed of the reach boom is measured via a telescope system.

PRODUCT DESCRIPTION

Accuracy ± 0.2% of the capacity for reachstackers till 100 t.

This system is the high-quality alternative to heavy-duty forklifts from 100,000 kg capacity. The weighing method with the high-quality BMD (Balanced Weight Determination) software on the TC indicator offers the best accuracy and is also classified as calibration according to SOLAS. Suitable for all reachstackers.

This system has no influence on the capacity of the truck and is independent of the load center point and can be used in combination with attachments. The weighing components are mounted and protected on the forklift truck and are insensitive to overloads and impact forces. The tilt sensor would be mounted on the mast ensures a tilt compensation of the weighing.
 

WEIGHING PROCEDURE

A: weighing procedure with high accuracy (execution in rest position – movement in two directions):

Weight with boom in retracted position and an angle between 10 ° and 30 °. The weighing procedure is activated via the indicator. Container approx. 3 sec. move up and move down again after the beep until the beep indicates that the weighing is complete.

B: fast weighing procedure (automatic weighing by means of a single falling movement):

The container is moved with a reachstacker. When moving down, the boom moves along a certain angle and a sensor starts the weighing.

TECHNICAL SPECIFICATIONS

SPECIFICATION DATA
Weighing capacity 99,999 kg
Weighing tolerance ± 0.2 %
Max. divisions 1,000
Nominal supply voltage 12 – 80
Power consumption < 5 W
Temperature range 0 – 50 °C
Protection class, display IP 50
Protection class, sensors IP 65
Display Graphical high contrast

 

FEATURES

BALANCED MASS DETERMINATION

BMD is a patented and accurate hydraulic based weighing technology which is utilized in the TC3000-RS solution. In addition to the advantages mentioned for DMD, hydraulic pressure, height, velocity and acceleration of the forks are recorded during upwards and downwards manoeuvring, which significantly improves the weighing accuracy and long term stability of the solution.

TECHNOLOGY

The TC3000-RS is based on the patented hydraulic weighing principle (BMD), which practically eliminates the influence of mechanical friction, non-linearity and weighing tolerances caused by loads positioned on the fork tips. This system represents the world’s most accurate hydraulic weighing system for forklift trucks, it is also highly robust. The dual tilt compensation technology ensures an exact weighing result regardless of the inclination of the forklift mast and the floor. The power supply and transient protection circuit enablesthe TC3000-RS to fit almost any forklift truck without having to pay special attention to supply voltages and electrical noise.